How to Install iPC OSx86 10.6. UNiVERSAL IntelAMD on Your PC
How to Install iPC OSx86 10.6. UNiVERSAL IntelAMD on Your PC
If you want to experience the Mac OS X on your PC, you can try iPC OSx86 10.6. UNiVERSAL IntelAMD, a custom distribution of Mac OS X Snow Leopard that supports both Intel and AMD processors. In this article, we will show you how to install iPC OSx86 10.6. UNiVERSAL IntelAMD on your PC using a USB drive.
What You Need
A PC with an Intel or AMD processor that supports SSE2 and SSE3 instructions.
A USB drive with at least 8 GB of free space.
A copy of iPC OSx86 10.6. UNiVERSAL IntelAMD ISO file, which you can download from here.
A copy of TransMac software, which you can download from here.
A backup of your important data, as the installation process will erase your hard drive.
Step 1: Create a Bootable USB Drive
First, you need to create a bootable USB drive with iPC OSx86 10.6. UNiVERSAL IntelAMD ISO file. To do this, follow these steps:
iPC OSx86 10.6. UNiVERSAL IntelAMD
Download: https://dandmilkbutneu.blogspot.com/?d=2tGEdK
Insert your USB drive into your PC and launch TransMac software.
Right-click on your USB drive and select "Format Disk for Mac". This will erase all the data on your USB drive and format it as Mac OS Extended (Journaled).
Right-click on your USB drive again and select "Restore with Disk Image". This will open a dialog box where you can browse and select the iPC OSx86 10.6. UNiVERSAL IntelAMD ISO file.
Click "OK" and wait for the process to complete. This may take some time depending on the size of the ISO file and the speed of your USB drive.
Once done, eject your USB drive and insert it into the PC where you want to install iPC OSx86 10.6. UNiVERSAL IntelAMD.
Step 2: Boot from the USB Drive
Next, you need to boot from the USB drive that contains iPC OSx86 10.6. UNiVERSAL IntelAMD installer. To do this, follow these steps:
Turn on your PC and press the key that opens the boot menu. This may vary depending on your PC model and BIOS settings, but it is usually F12, F10, F8, or Esc.
Select the USB drive as the boot device and press Enter.
You should see a screen with a gray Apple logo and a spinning wheel. Wait for a few minutes until you see a welcome screen with different languages.
Select your preferred language and click "Next".
Step 3: Prepare Your Hard Drive
Before you can install iPC OSx86 10.6. UNiVERSAL IntelAMD on your hard drive, you need to partition and format it as Mac OS Extended (Journaled). To do this, follow these steps:
On the top menu bar, click "Utilities" and select "Disk Utility".
Select your hard drive from the left panel and click "Partition".
Click the "+" button to create a new partition and adjust its size according to your preference. You can also rename it if you want.
Make sure the format is set to "Mac OS Extended (Journaled)" and click "Apply". This will erase all the data on your hard drive and create a new partition for iPC OSx86 10.6. UNiVERSAL IntelAMD.
Close Disk Utility and return to the installer screen.
Step 4: Install iPC OSx86 10.6. UNiVERSAL IntelAMD 29c81ba772